Reference: drawing symbols, abbreviations and tolerance standards

Last reviewed 19 November 2026 · Written by Paul, who also builds and supports the tool

These reference pages explain what the marks, abbreviations and notes on an engineering drawing mean, from the point of view of the person who has to inspect the part and write the report. Each page shows how the item is recorded in the tool's report table.
Detail A · Pages

What is here

One line for each page

  • Engineering drawing symbols: diameters, radii, boxes, brackets, frames and view markers, with what each means for the report.
  • Abbreviations: TYP, THRU, 4X, REF, B.C. and many more, with an example each.
  • Hole callouts: counterbore, countersink, depth and thread callouts split into separate characteristics.
  • Surface finish symbols: the check-mark symbols and Ra values, with an example report row.
  • ISO 2768: how a general-tolerance callout in a title block is read.

How to use them

Start with the symbols page when a mark on the drawing is unfamiliar. Use the abbreviations page when a callout carries a quantity or an instruction such as 4X or THRU, because those change how many report rows a callout produces. Use the hole callouts page when one line describes a diameter, a counterbore and a depth together. Use the general tolerances page when a dimension has no tolerance printed beside it.

What these pages do not do

They explain ideas in our own words. They do not reproduce any standard: the standards are sold by their publishers, and where a number matters we link to the source or say that we could not verify it. Your drawing and your customer's requirements always outrank a general explanation.

Next steps

If you want to put this into practice, open a drawing in the tool, balloon it and fill the table. The guides cover the method and the GD&T chart covers the geometric tolerance symbols.

Open a drawing — free

Related

Do not scale drawingThird-angle projectionSheet 1 of 1balloonmydrawing.com
Built and supported by Paul: [email protected]. AS9102 is a standard of SAE International; this site is not affiliated with or endorsed by SAE. Nothing here reproduces the standard. Explanations are our own and are not legal or compliance advice.Privacy · Terms · Refunds