How to balloon a drawing: a step-by-step method for inspection reports
Decide what gets a balloon
Read the drawing and the purchase order first. A balloon belongs on every feature the customer expects to see in the report: each toleranced dimension, each general note that calls for a check such as a surface finish or a thread, and each callout in a feature control frame. If the same dimension appears twice, for example in two views, it gets one balloon, not two. Decide this before you place the first number, because renumbering a drawing you have already issued causes confusion.
Print or open the sheet at a size where the smallest text is readable. On a multi-sheet drawing you number straight through the sheets, so sheet two continues from the last number on sheet one.
Number in a fixed order
- Pick a starting point and a direction. Many inspectors start at the top left of the first view and work left to right, top to bottom, then move to the next view. Which order you choose matters less than keeping to it.
- Place each balloon close to its dimension, with a leader if the space is tight. The circle should not cover any line or text. In the tool, a click places the next number; a drag adds a leader back to the feature.
- Give a quantity feature its own sub-numbers. A callout such as 4X Ø9.0 is four holes. Number it once, then split it into 6.1 to 6.4 if you will report each hole separately. The tool's Split button does this without renumbering anything else.
- If you miss one, do not renumber. Insert it as a sub-number after its neighbour, such as 4.1. Numbers that have already gone to the customer keep meaning the same thing.
- Check the count. Every number from 1 to the last should appear exactly once on the drawing and once in the report.
The sample part
The sample drawing is a flanged bushing with seven toleranced dimensions. Ballooned in the tool it looks like this.
Each balloon becomes a row. The tool fills the requirement from the printed text, works out the lower and upper limit from the tolerance, and shows a verdict once you type a measured result. The result values below are made-up demo values.
| No. | Requirement | Min | Max | Result | Verdict |
|---|---|---|---|---|---|
| 1 | 20.0 ±0.2 | 19.8 | 20.2 | 20.08 | IN TOL |
| 2 | 70.0 ±0.3 | 69.7 | 70.3 | 69.91 | IN TOL |
| 3 | ⌀110.0 ±0.1 | 109.9 | 110.1 | 110.04 | IN TOL |
| 4 | ⌀70.0 +0.03/0 | 70.0 | 70.03 | 70.02 | IN TOL |
| 5 | ⌀30.00 +0.02/0 | 30.00 | 30.02 | 30.01 | IN TOL |
| 6 | 4X ⌀9.0 ±0.1 THRU | 8.9 | 9.1 | 9.05 | IN TOL |
| 7 | ⌀90.0 ±0.1 B.C. | 89.9 | 90.1 | 90.03 | IN TOL |
Row 1, for instance, is a length of 20.0 with a tolerance of plus or minus 0.2, so the limits are 19.8 and 20.2 and a measured 20.08 is within them. See how to read tolerances for the other forms on this drawing, such as the 70.0 +0.03/0 diameter that only allows size above nominal.
What goes wrong
- Balloons covering the dimension. If the number hides the value, the next reader cannot check it. Use a leader.
- Two numbers for one dimension. Dimensions repeated in two views get one balloon.
- Skipping general notes. A note that says to break sharp edges is a requirement; if the customer expects it in the report, it needs a number.
- Renumbering after issue. Insert sub-numbers instead.
- Ballooning from a scan by eye and losing the original. Keep the original file; the balloons live in a copy.
Do it in the browser
The tool opens a PDF in your browser, places the numbers you click, and writes the table. On a CAD-exported PDF with selectable text it can also find the dimension text for you to confirm; on a scan it says so and you click each one. Your drawing is not uploaded.
Ballooning rules at a glance
| Question | Common practice |
|---|---|
| What gets a balloon? | Every dimension, GD&T frame, thread, finish and note that carries a requirement |
| In what order? | Start at the upper left, go clockwise, finish one sheet and continue on the next |
| A dimension repeated in two views? | One balloon: one characteristic, one number |
| A 4X or TYP callout? | One balloon with several results, or sub-numbers 6.1 to 6.4 if the customer wants each feature separately |
| A reference dimension? | Normally no balloon; see reference dimension |
| A basic dimension? | Balloon the governing frame; see basic dimension |
| The drawing changes after you balloon it? | Reopen the new revision, renumber and re-check every row |
Which numbering order should I use?
Start at the upper left of the sheet and work clockwise, sheet by sheet. That is common practice described by quality professionals in public forums, for example this discussion on numbering characteristics. It is not a rule of any standard we can quote: if your customer states a different order, follow theirs.
Revising after a drawing change
When the drawing is revised, open the new revision as a new file in the same project. The tool notices it is a different PDF and asks before keeping balloons. Check each characteristic against the new print, because a moved dimension can keep its number but change its limits.
Balloon colour and size
Colour and size are matters of readability. Keep the circle large enough to read when printed, small enough not to cover the drawing, and use a leader line when the space is tight. Some customers specify a colour: ask.
- How many balloons should a drawing have?
- One for every characteristic the report must cover, so it depends on the drawing. A simple turned part may have a dozen; a complex machined housing many dozens. There is no fixed number.
- Should balloons go on the drawing or on a copy?
- On a copy. Keep the original controlled drawing untouched and balloon the copy you send with the report.
- Can I balloon a PDF without special software?
- Yes. You can balloon any drawing PDF in your browser here, and the free export carries a watermark.
- How do I number dimensions on a drawing for an inspection report?
- Start at the upper left of the sheet and work clockwise, finishing one sheet before the next. This is common practice, not a rule of a standard we can quote. If the customer states another order, follow theirs.
- How do I handle 4X or TYP on a balloon?
- Use one balloon with several results, or sub-numbers such as 6.1 to 6.4 if each feature needs its own row. For TYP, confirm how many features it covers. Customer preference decides.
- What gets a balloon on a drawing?
- Every dimension, geometric tolerance frame, thread, finish and note that carries a requirement. Reference dimensions normally do not, and basic dimensions are ballooned through their frame.
- What do I do when the drawing is revised after ballooning?
- Open the new revision, renumber and re-check every row against the new print, because a moved dimension can keep its number but change its limits.