Skip to content

Sheet · First article inspection software for small shops

First article inspection software for small shops

Balloon My Drawing balloons a drawing PDF and builds the inspection report. It is a small tool for small shops, not a quality management suite: no CMM import, no SPC, no supplier portal.

Try the sample drawing

No account. No trial clock. The file opens in your browser and is not uploaded. How to check. Drop a PDF anywhere here.

What it does

You click each dimension on the drawing. The tool numbers it and builds the characteristic table. You type the requirement and the measured result. It exports a ballooned PDF and a report in the Form 3 arrangement as PDF, Excel and CSV.

What it does not do

Auto-detect works on CAD-exported PDFs with selectable text, and you confirm what it finds; scanned drawings are ballooned by hand. It has no CMM import, gauge management, SPC or supplier submission. If you need those, a full inspection suite is the right tool.

Forms 1 and 2 are not part of this version.

Where your drawing goes

Nowhere. The PDF is opened by your browser and is not sent to our servers. See how to check on the page about how we handle your drawing.

What this does and what a full suite does

Scope, stated plainly.
CapabilityThis toolA full FAI suite typically
Balloon a drawing PDFYesYes
Form 3-style characteristic reportYesYes
Forms 1 and 2NoOften yes
CMM or arm data importNoOften yes
SPC and gauge managementNoOften yes
E-signatureNoOften yes
Supplier portalNoOften yes
InstallNone: runs in a browserVaries by vendor

Scope, stated plainly.

Detail W · worked example on the sample drawing

Worked example

FLANGED BUSHING - SAMPLE PARTDRAWN FOR balloonmydrawing.com SHEET 1 OF 1 MMSECTION A-AFRONT VIEW20.0 ±0.270.0 ±0.3⌀110.0 ±0.1⌀70.0 +0.03/0⌀30.00 +0.02/04X ⌀9.0 ±0.1 THRU⌀90.0 ±0.1 B.C.1234567
Figure 1. The bundled sample drawing, ballooned in the tool.
No.RequirementMinMaxResultVerdict
120.0 ±0.219.820.220.08IN TOL
270.0 ±0.369.770.369.91IN TOL
3⌀110.0 ±0.1109.9110.1110.04IN TOL
4⌀70.0 +0.03/070.070.0370.02IN TOL
5⌀30.00 +0.02/030.0030.0230.01IN TOL
64X ⌀9.0 ±0.1 THRU8.99.19.05IN TOL
7⌀90.0 ±0.1 B.C.89.990.190.03IN TOL

Table 1. Rows produced by the tool for the sample part. Measured results are made-up demo values.

Common mistakes

  • Buying a quality management suite when the job is one report. This tool only balloons and reports.
  • Expecting CMM import. There is none.
  • Issuing a report without a note against each out-of-tolerance row.

Read more

Questions

Is this a quality management system?
No. It balloons a drawing and builds the inspection report. It has no CMM import, SPC, gauge management or supplier portal. Shops that need those should look at a full inspection suite.
Who is it for?
Machine shops, medical device suppliers, automotive suppliers and anyone asked for a first article report on a drawing.
Is it AS9102 software?
The report follows an AS9102-style Form 3 layout. Whether a first article meets your customer's requirements is a matter for your own process, not a property of a file.

See pricing · How we handle your drawing

Do not scale drawingThird-angle projectionSheet 1 of 1balloonmydrawing.com
Built and supported by Paul: [email protected]. Please do not send us drawings. AS9102 is a standard of SAE International; this site is not affiliated with or endorsed by SAE. The report uses an AS9102-style Form 3 layout and is not a statement that your first article meets any requirement.Free · FAI software · Form 3 layout · Template · Guides · GD&T · Compare · Templates · Privacy · Terms · Refunds