PPAP dimensional results explained, and how they differ from a first article report

Last reviewed 19 November 2026 · Written by Paul, who also builds and supports the tool

PPAP, the production part approval process, is an automotive-style package that proves a supplier's process can make a part to specification. Its dimensional results are a table of measurements for several parts against the ballooned drawing. A first article report records a complete check of one article. The measuring is similar; the purpose and the number of parts differ.

At a glance

First article inspection PPAP dimensional results
Scope Every characteristic on the drawing, plus materials and processes One element of a larger approval package
Industry Aerospace and defence in particular Automotive in particular, and other industries that adopted it
Governing document The standard or customer clause named in the contract The PPAP manual and the customer's requirements
What is submitted A report in the layout the customer requires A table of dimensional results for the parts the customer specifies
Role of the ballooned drawing Each characteristic is numbered and traced to a report row The same, so each result is tied to a feature

In one sentence: an FAI report accounts for every characteristic of the first part from a process, while PPAP dimensional results are one part of a package that approves a production process.

Detail A · Two different questions

What each one answers

A first article inspection answers: does this first part meet every requirement? A PPAP package answers a wider question: can this process make conforming parts repeatedly, and is there documentation behind it? The dimensional results are only one element of a PPAP package, which also carries items such as process flow and control documents. This page covers just the dimensional part.

Detail B · Dimensional results

What the table looks like

The table is organised around the same ballooned drawing. Each balloon is a row. For each row there is the requirement, the tolerance, and then a set of measured results from several parts, with an overall assessment. Because several parts are measured, the table has a column for each part.

The tool supports this with Tolerances and parts: choose the number of measured parts and each balloon gets that many result columns. You can paste a block of results from a spreadsheet and the values fill across and down. A row is out of tolerance if any measured part is out.

Detail C · Where they overlap

One drawing, two documents

If a customer asks for both, the work is the same up to the point of measuring: balloon the drawing, record each requirement, measure. Then a first article report lists one result per row, while the dimensional results table lists a result per part. A report with several result columns serves both purposes in many shops, but your customer's format decides.

Report rows for the sample drawing
No.RequirementMinMaxResultVerdict
120.0 ±0.219.820.220.08IN TOL
270.0 ±0.369.770.369.91IN TOL
3⌀110.0 ±0.1109.9110.1110.04IN TOL
4⌀70.0 +0.03/070.070.0370.02IN TOL
5⌀30.00 +0.02/030.0030.0230.01IN TOL
64X ⌀9.0 ±0.1 THRU8.99.19.05IN TOL
7⌀90.0 ±0.1 B.C.89.990.190.03IN TOL

Table: rows produced by the tool for the sample drawing. The measured results are made-up demo values.

Common mistakes

  • Measuring fewer parts than the customer's requirement states.
  • Mixing parts from different cavities or fixtures in the same column without saying so.
  • Leaving a part's result blank when it was not measured; say so instead.

Worked example on the sample part

The same sample drawing can feed either report. For an FAI package you balloon it, measure the seven characteristics on the first part and record the seven rows. For PPAP dimensional results the customer might ask for several parts: the same seven rows would be repeated for each part, as measured columns, so a reviewer can see the spread. The tool supports several measured parts for exactly this case, with a verdict per part.

Report rows for the sample drawing
No.RequirementMinMaxResultVerdict
120.0 ±0.219.820.220.08IN TOL
270.0 ±0.369.770.369.91IN TOL
3⌀110.0 ±0.1109.9110.1110.04IN TOL
4⌀70.0 +0.03/070.070.0370.02IN TOL
5⌀30.00 +0.02/030.0030.0230.01IN TOL
64X ⌀9.0 ±0.1 THRU8.99.19.05IN TOL
7⌀90.0 ±0.1 B.C.89.990.190.03IN TOL

Table: rows produced by the tool for the sample drawing. The measured results are made-up demo values.

Take row 4, limits 70.00 to 70.03. For one part the report shows one result. For a PPAP-style set it might show five results side by side, and a reviewer can see at a glance whether all five are inside the limits and how close to the upper limit they run. A set of five readings that all sit at 70.03 would tell a different story from five scattered across the range, even though all are in tolerance.

What is the same and what differs

The measuring is the same. The ballooned drawing is the same. The difference is in the package: FAI wraps the table with part identity and material and process accounting, while PPAP wraps it with the other approval elements such as the control plan and process studies. Both rely on the same underlying evidence: a numbered characteristic with a measured result.

Terms that get confused

Term Meaning
FAI First article inspection
FAIR First article inspection report
PPAP Production part approval process
PSW Part submission warrant, one PPAP document
ISIR Initial sample inspection report, a term used by some customers for a first-sample dimensional report

Mistakes people make

  • Submitting an FAI report where PPAP was asked for, or the reverse.
  • Measuring a single part when the customer asked for several.
  • Forgetting the drawing revision on the table.
Is a PPAP the same as FAI?
No. FAI proves a first article; PPAP proves a production process and carries more than a dimensional table.
Can I use the same ballooned drawing for both?
Usually yes, because both are keyed to the same balloon numbers.
What is the difference between PPAP and first article inspection?
FAI documents the inspection of the first parts from a process against every drawing requirement. PPAP is a wider approval package of which dimensional results are one element. Both use a ballooned drawing and a table of results.
What is ISIR in quality?
ISIR stands for initial sample inspection report. Some customers use it for a dimensional report on first samples, similar in purpose to a first article report. Ask the customer which layout they want.
What are PPAP dimensional results?
A table of dimensional results for the parts the customer specifies, with the specification, the measured values and an assessment for each characteristic. A ballooned drawing ties each result to a feature.
Can the same report serve FAI and PPAP?
Often the table can be reused, but the package around it differs. Check what each requirement asks for, including the number of parts and the layout.

Open a drawing — free

Related

Do not scale drawingThird-angle projectionSheet 1 of 1balloonmydrawing.com
Built and supported by Paul: [email protected]. AS9102 is a standard of SAE International; this site is not affiliated with or endorsed by SAE. Nothing here reproduces the standard. Explanations are our own and are not legal or compliance advice.Privacy · Terms · Refunds