Sheet · First article inspection report template
First article inspection report template
A blank first article inspection report with a header strip and one row per characteristic, generated in your browser as PDF or Excel. Fill it by hand, or build it from a ballooned drawing.
No account. No trial clock. The file opens in your browser and is not uploaded. How to check. Drop a PDF anywhere here.
Template generator
Generated in your browser. Nothing you type here is sent anywhere.
Fill it from a drawing
Open the drawing in the tool and click each dimension. The table builds itself, and the report exports as PDF with a watermark for free, or clean PDF, Excel and CSV on a paid option.
First article inspection form, format, sheet, Excel or PDF
People search for this under several names: form, format, sheet, template. It is the same document: a header, then one row per characteristic. The generator above gives it as PDF and Excel. For the part identity and materials sheets see the Forms 1, 2 and 3 page, and for a tick list see the checklist.
How this differs from the Form 3 layout
The Form 3-style generator uses the arrangement of a characteristic accountability form. This template is the general version, with the same columns, for any customer that asks for a first article report in a plain layout.
The columns
| Column | What goes in it |
|---|---|
| No. | Balloon number |
| Sheet and zone | Where it is on the drawing |
| Requirement | The dimension as printed |
| Min and Max | Limits from the tolerance |
| Result | What was measured |
| Verdict | In or out, in words |
| Tooling | Instrument used |
| Notes | Reason for any out-of-tolerance result |
What each column holds.
Worked example
| No. | Requirement | Min | Max | Result | Verdict |
|---|---|---|---|---|---|
| 1 | 20.0 ±0.2 | 19.8 | 20.2 | 20.08 | IN TOL |
| 2 | 70.0 ±0.3 | 69.7 | 70.3 | 69.91 | IN TOL |
| 3 | ⌀110.0 ±0.1 | 109.9 | 110.1 | 110.04 | IN TOL |
| 4 | ⌀70.0 +0.03/0 | 70.0 | 70.03 | 70.02 | IN TOL |
| 5 | ⌀30.00 +0.02/0 | 30.00 | 30.02 | 30.01 | IN TOL |
| 6 | 4X ⌀9.0 ±0.1 THRU | 8.9 | 9.1 | 9.05 | IN TOL |
| 7 | ⌀90.0 ±0.1 B.C. | 89.9 | 90.1 | 90.03 | IN TOL |
Table 1. Rows produced by the tool for the sample part. Measured results are made-up demo values.
Common mistakes
- Filling a blank template by hand for forty characteristics when the drawing can generate the rows.
- Mixing units in one table without saying so.
- Rounding results so they fall inside the limits.
Read more
Questions
- How do I fill the template from a drawing?
- Open the drawing in the tool, click each dimension, and the table builds itself. Export the report as PDF (free, watermarked) or Excel and CSV (paid).
- Is there a first article inspection template in Excel?
- Yes. The generator on this page gives the blank report as Excel and as PDF.
- What is the difference between this and the Form 3 layout?
- The Form 3-style generator follows the arrangement of a characteristic accountability form. This is the general template with the same columns for any customer that wants a plain layout. See also the checklist and the worked example.