Sheet · AS9102-style Form 3 layout generator
AS9102-style Form 3 layout: free report template generator
Enter the header fields and download a blank inspection report laid out like Form 3, as PDF or Excel. It is generated in your browser by the same code as the tool, and contains no text from the standard.
No account. No trial clock. The file opens in your browser and is not uploaded. How to check. Drop a PDF anywhere here.
Template generator
Generated in your browser. Nothing you type here is sent anywhere.
What the layout contains
A header strip with part number, part name, serial or lot, report ID, revision, prepared by and date. Then one row per characteristic with columns for the number, sheet, zone, designator, requirement, result, verdict, tooling and notes.
What this is not
It is our own layout, not the official form, and it is not affiliated with or endorsed by SAE International. Column headings are short labels we wrote. The standard itself is sold by SAE.
What is characteristic accountability?
Characteristic accountability means every characteristic on the drawing is identified, shown to have been inspected, and tied to a result, so nothing is skipped and every result can be traced to the print.
The columns, in our own words
| Column | What goes in it | Sample row |
|---|---|---|
| Characteristic no. | The balloon number | 4 |
| Reference location | Sheet and zone on the drawing | Sheet 1, B3 |
| Characteristic designator | A short tag such as key or critical, if the customer uses one | (blank) |
| Requirement | The dimension or note as printed | Diameter 70.0 +0.03/0 |
| Results | What was measured | 70.02 |
| Tooling | Instrument used | Bore gauge |
| Nonconformance no. | Reference, if a result is out of tolerance | (blank) |
One illustrative row. The requirement and result come from the sample part; the zone and tooling are invented for the example.
Worked example
| No. | Requirement | Min | Max | Result | Verdict |
|---|---|---|---|---|---|
| 1 | 20.0 ±0.2 | 19.8 | 20.2 | 20.08 | IN TOL |
| 2 | 70.0 ±0.3 | 69.7 | 70.3 | 69.91 | IN TOL |
| 3 | ⌀110.0 ±0.1 | 109.9 | 110.1 | 110.04 | IN TOL |
| 4 | ⌀70.0 +0.03/0 | 70.0 | 70.03 | 70.02 | IN TOL |
| 5 | ⌀30.00 +0.02/0 | 30.00 | 30.02 | 30.01 | IN TOL |
| 6 | 4X ⌀9.0 ±0.1 THRU | 8.9 | 9.1 | 9.05 | IN TOL |
| 7 | ⌀90.0 ±0.1 B.C. | 89.9 | 90.1 | 90.03 | IN TOL |
Table 1. Rows produced by the tool for the sample part. Measured results are made-up demo values.
Common mistakes
- Treating the generated sheet as the official form. It is our own layout.
- Leaving the header strip blank on a report you issue.
- Entering a verdict without the limits it was judged against.
Read more
Questions
- Is this the official AS9102 form?
- No. It is our own report laid out in the arrangement of a characteristic accountability form. It contains no text from the standard and is not affiliated with or endorsed by SAE International.
- Is the report "AS9102 compliant"?
- The report follows the Form 3 layout. Whether a first article meets your customer's requirements is a matter for your own process.
- What is characteristic accountability?
- Every characteristic on the drawing is identified, shown to have been inspected and tied to a result, so nothing is skipped and every result traces back to the print.
- Is there an Excel version?
- Yes. The generator gives the blank layout as Excel as well as PDF.
- Which revision does the layout follow?
- We make no claim about a revision. The layout follows the arrangement of a characteristic accountability form. Ask your customer which one they require.