What is a ballooned drawing? Meaning, purpose and how to make one
Why the balloons are there
An inspector has to show that a part meets every requirement on its drawing, and a drawing can hold dozens of dimensions spread over several views. Without a number on each, a report cannot say which dimension a result belongs to, and a reader cannot check that nothing was skipped. The balloon is the link: number 14 on the drawing is row 14 in the report.
This is a drafting term. It has nothing to do with the party kind of balloon, and a search for "balloon drawing" mostly returns drawing tutorials, so on this site we say "engineering drawing" or "inspection" to keep the meaning clear.
Is a ballooned drawing required for AS9102?
A ballooned drawing is the usual way to give each characteristic a unique number so the report can reference it. Whether a particular standard or contract requires it, and in what form, is something to confirm in your licensed copy of the standard and in your customer's purchase terms. This site does not quote the standard, and it does not say that a document is required where we could not check the text. If your customer states how characteristics must be identified, that instruction wins.
What a good balloon looks like
- A circle with a number, close to the dimension it numbers.
- A short leader line when the space is tight, so the circle does not cover the value.
- One balloon per characteristic, even if the dimension appears in two views.
- Numbers in a stated order that continue across sheets.
| No. | Requirement | Min | Max | Result | Verdict |
|---|---|---|---|---|---|
| 1 | 20.0 ±0.2 | 19.8 | 20.2 | 20.08 | IN TOL |
| 2 | 70.0 ±0.3 | 69.7 | 70.3 | 69.91 | IN TOL |
| 3 | ⌀110.0 ±0.1 | 109.9 | 110.1 | 110.04 | IN TOL |
| 4 | ⌀70.0 +0.03/0 | 70.0 | 70.03 | 70.02 | IN TOL |
| 5 | ⌀30.00 +0.02/0 | 30.00 | 30.02 | 30.01 | IN TOL |
| 6 | 4X ⌀9.0 ±0.1 THRU | 8.9 | 9.1 | 9.05 | IN TOL |
| 7 | ⌀90.0 ±0.1 B.C. | 89.9 | 90.1 | 90.03 | IN TOL |
Reading across row 4: the requirement is a diameter of 70.0 with a tolerance of plus 0.03 and nothing below, so the limits are 70.0 to 70.03 and a measured 70.02 is within them. The full method is in how to balloon a drawing.
Common mistakes
- Numbering twice. Give each characteristic one number and keep it.
- Covering the dimension with the circle.
- Forgetting notes. A general note that calls for a check, such as a coating or a thread, may need a balloon too.
- Mixing numbering orders between sheets.
A short history of the word
The balloon is a drafting convention that predates software: a circle with a number and a leader, used to point at an item. The same shape serves two jobs. On an assembly drawing it points to an item in the parts list. On an inspection drawing it points to a characteristic to be measured. Software that "balloons" drawings for inspection numbers the second kind.
A worked example of numbering
On the sample flanged bushing there are seven balloons, and the quantity callout is one balloon (number 6) that covers four holes. If the customer wants each hole reported separately, the tool splits it into 6.1 to 6.4. The report then has ten rows, and every one of them traces to a balloon on the print.
What a reviewer does with it
A reviewer holds the ballooned drawing next to the report and checks that every number on the drawing has a row and every row has a number on the drawing. That check takes minutes with a clean ballooned drawing and much longer without one. That is the practical reason for the convention.
Worked example table
The generated table shows what the balloons on the sample become: seven numbered rows with requirement, limits, result and verdict.
| No. | Requirement | Min | Max | Result | Verdict |
|---|---|---|---|---|---|
| 1 | 20.0 ±0.2 | 19.8 | 20.2 | 20.08 | IN TOL |
| 2 | 70.0 ±0.3 | 69.7 | 70.3 | 69.91 | IN TOL |
| 3 | ⌀110.0 ±0.1 | 109.9 | 110.1 | 110.04 | IN TOL |
| 4 | ⌀70.0 +0.03/0 | 70.0 | 70.03 | 70.02 | IN TOL |
| 5 | ⌀30.00 +0.02/0 | 30.00 | 30.02 | 30.01 | IN TOL |
| 6 | 4X ⌀9.0 ±0.1 THRU | 8.9 | 9.1 | 9.05 | IN TOL |
| 7 | ⌀90.0 ±0.1 B.C. | 89.9 | 90.1 | 90.03 | IN TOL |
How to make one
Open a copy of the drawing PDF in the tool, click each dimension, and export the ballooned PDF. If the PDF came from CAD with its text, auto-detect lists the dimensions for you to confirm.
- What is the difference between a balloon on an assembly drawing and an inspection balloon?
- A balloon on an assembly drawing usually points to an item in a parts list. An inspection balloon numbers a characteristic to be measured. They look alike and mean different things.
- Do I balloon the original drawing?
- Balloon a copy and keep the controlled original unchanged.
- What does ballooning mean in engineering?
- It means numbering each dimension and note to be inspected with a circled number, so each appears as a row in an inspection report and can be traced to the drawing.
- Is a ballooned drawing required for first article inspection?
- Unique identification of each characteristic is what is asked for, and ballooning is the usual way. Whether a standard or contract requires it in a particular form is for your customer and licensed copy to say.
- Do I balloon the original drawing?
- Balloon a copy and keep the controlled original unchanged.
Related
- How to balloon a drawing: a step-by-step method for inspection reports
- What is first article inspection, and when is it asked for?
- The Form 3-style inspection report, column by column
- How to balloon a PDF drawing
- Auto-ballooning software: what it can read, and what it cannot
- Open the tool and try it on a drawing