Auto-ballooning software: what it can read, and what it cannot

Last reviewed 19 November 2026 · Written by Paul, who also builds and supports the tool

Auto-ballooning software finds the dimensions on a drawing and numbers them for you. Balloon My Drawing does this by reading the selectable text in a CAD-exported PDF and listing every dimension-like string, and you confirm each one before it becomes a balloon and a row in the report.
Detail A · How it works here

The mechanism: the text layer, then your confirmation

A PDF exported from CAD usually carries its dimension text as real characters, not as a picture. The tool reads those characters in your browser, works out which ones look like dimensions, and shows them in a review list: the printed text, the sheet, and the requirement it would write. You tick what to balloon and press one button, or you simply click a dimension on the drawing and it is ballooned and its row filled at once.

It is not artificial intelligence and it does no optical character recognition. It reads text that is already there, and it asks you to confirm because a number on a drawing is not always a dimension: a part number, a scale, a date or an item number can look like one.

Detail B · What it does and does not do

Works and does not work

Situation Result
CAD-exported PDF with selectable text Dimensions are listed for you to confirm
Plus/minus, unilateral and limit tolerances, diameters, radii, angles Read into nominal, upper and lower
Threads and quantity prefixes such as 4X Read as written; a quantity can be split into 6.1, 6.2 and so on
Scanned drawing or photo of a print No text to read: you click each dimension
Dimensions drawn as outlines rather than text Not detected
Feature control frames Not read: you enter them with the GD&T builder
Anything it reads Always shown for confirmation, never added silently

Does auto ballooning work on scanned drawings?

No. Auto-detect reads selectable text only; scanned drawings are ballooned by clicking each dimension. Several other tools say they balloon automatically, and some describe handling scans, but this tool does not.

How to test your own PDF

  1. Open the PDF in any viewer and try to select a dimension with the text-select tool, or search for a number you can see on the drawing.
  2. If the text highlights or the search finds it, the PDF has a text layer and Detect will work.
  3. If nothing highlights, or search finds nothing, it is an image. The tool will say so plainly and you balloon by hand.
Detail C · Worked example

The sample part

The sample drawing is a CAD-style PDF with a text layer. The tool lists its seven dimensions, parses them, and, once you balloon all of them, produces this report.

FLANGED BUSHING - SAMPLE PARTDRAWN FOR balloonmydrawing.com SHEET 1 OF 1 MMSECTION A-AFRONT VIEW20.0 ±0.270.0 ±0.3⌀110.0 ±0.1⌀70.0 +0.03/0⌀30.00 +0.02/04X ⌀9.0 ±0.1 THRU⌀90.0 ±0.1 B.C.1234567
Figure 1. The seven dimensions the tool detects on the sample drawing, ballooned.
Report rows for the sample drawing
No.RequirementMinMaxResultVerdict
120.0 ±0.219.820.220.08IN TOL
270.0 ±0.369.770.369.91IN TOL
3⌀110.0 ±0.1109.9110.1110.04IN TOL
4⌀70.0 +0.03/070.070.0370.02IN TOL
5⌀30.00 +0.02/030.0030.0230.01IN TOL
64X ⌀9.0 ±0.1 THRU8.99.19.05IN TOL
7⌀90.0 ±0.1 B.C.89.990.190.03IN TOL

Table: rows produced by the tool for the sample drawing. The measured results are made-up demo values.

Common mistakes

  • Trusting the list without reading it. A detected string is a suggestion; check that it is a dimension and that the limits are right.
  • Expecting detection on a scan, a photo or a flattened print.
  • Forgetting that a title-block general tolerance is not detected as a dimension; set it in the Tolerances and parts dialog.
Is auto-ballooning accurate?
We state no accuracy figure, because we have not measured one on a stated test set. Every detected item is shown for you to confirm.
Does it use AI?
No. It reads the text layer and applies fixed rules for the common dimension forms.
Which tools balloon scanned drawings automatically?
Some of the tools on the comparison page say they do. We do not.
How do I test whether my PDF has selectable text?
Try selecting a dimension in a viewer or search for a number you can see. If it highlights, the PDF has a text layer and Detect will work.
Does auto ballooning work on scanned drawings?
No. Auto-detect reads selectable text only. Scanned drawings are ballooned by clicking each dimension.

Open a drawing — free

Related

Do not scale drawingThird-angle projectionSheet 1 of 1balloonmydrawing.com
Built and supported by Paul: [email protected]. AS9102 is a standard of SAE International; this site is not affiliated with or endorsed by SAE. Nothing here reproduces the standard. Explanations are our own and are not legal or compliance advice.Privacy · Terms · Refunds