Balloon a CAD-exported PDF: SolidWorks, Fusion and other sources

Last reviewed 19 November 2026 · Written by Paul, who also builds and supports the tool

Export the drawing from your CAD system as a PDF that keeps its text (not as an image), open it in the tool, run Detect to list the dimensions, confirm the ones you want, and export the report. The balloons are drawn on a copy, so your CAD file is unchanged.
Detail A · Export settings

Keep the text

Most CAD systems write dimension text as real characters when you use their PDF export or a PDF printer driver set to vector output. A screenshot or an image print produces a picture and removes the text. Test the export: open it and select a dimension. If it highlights, it has text. See auto-ballooning.

Detail B · Steps

From CAD to report

  1. Export the drawing sheet as PDF with vector output and text kept.
  2. Open it in the tool; it stays in your browser.
  3. Press Detect and confirm the dimensions.
  4. Add feature control frames with the GD&T builder; Detect does not read them.
  5. Enter results and export the report.

Why not balloon in the CAD system?

CAD balloons usually number parts in a bill of materials. An inspection balloon numbers a characteristic to be measured. They look alike and mean different things, so a separate inspection copy is usual.

Common mistakes

  • Exporting an image PDF and then wondering why Detect finds nothing.
  • Editing the original CAD drawing instead of a copy.

Export checklist by system

The menu names vary between systems and versions, so use these as pointers and check your system's help. Look for an option that keeps text as text or as a vector, and avoid any that rasterises the page. If the PDF export offers a resolution or image quality setting, it is probably producing an image, and a vector option is what you want.

Checking the result

Open the exported file, select a dimension, and copy it into a text box. If the characters come out correctly, Detect will find them. If they come out as boxes or odd symbols, the fonts were not embedded as text and you will balloon by hand. Open the Tolerances and parts dialog afterwards and set the general tolerance from the title block.

Large drawings and many sheets

Detect works sheet by sheet and shows the list for the current sheet. Confirm the dimensions, move to the next sheet, and continue numbering. A multi-sheet drawing gets one continuous sequence.

A word on revisions

Export from the released revision, and note the revision on the report header. If the drawing is revised after you start, reopen the new PDF in the project: the tool detects a different file and asks before it keeps your balloons.

Mistakes to avoid

  • Exporting at screen resolution as an image.
  • Ballooning the original and losing track of the revision.

Worked example with the bundled sample

The bundled sample drawing is a CAD-style PDF with a text layer. Open it from the home page demo or the tool and press Detect: the tool lists its seven dimensions, parses each into nominal and tolerance, and offers them for confirmation. Confirm all seven and the report table is built, exactly the table below.

Report rows for the sample drawing
No.RequirementMinMaxResultVerdict
120.0 ±0.219.820.220.08IN TOL
270.0 ±0.369.770.369.91IN TOL
3⌀110.0 ±0.1109.9110.1110.04IN TOL
4⌀70.0 +0.03/070.070.0370.02IN TOL
5⌀30.00 +0.02/030.0030.0230.01IN TOL
64X ⌀9.0 ±0.1 THRU8.99.19.05IN TOL
7⌀90.0 ±0.1 B.C.89.990.190.03IN TOL

Table: rows produced by the tool for the sample drawing. The measured results are made-up demo values.

The only dimension that needs a decision is the 4X hole callout (row 6): leave it as one balloon with four results or split it into 6.1 to 6.4. Detect read it correctly as a quantity of four on a diameter of 9.0 plus or minus 0.1 THRU.

What exports well and what does not

Output from CAD Text layer? Detect result
Vector PDF export Usually yes Dimensions listed
PDF printed through a PDF printer driver Often yes, sometimes converted to outlines Test it
Image export (PNG, JPG) wrapped into a PDF No Click each dimension
Scan of a printed drawing No Click each dimension
PDF with fonts converted to outlines No Click each dimension

What Detect does not read

Feature control frames are drawn as boxes with symbols and are not parsed: use the GD&T builder. Notes are listed only if they look like dimensions. Title block general tolerances are not read: set them in the Tolerances and parts dialog. Everything Detect proposes is a suggestion that you confirm.

Checking before you rely on it

After confirming the list, count the dimensions on the drawing yourself and compare with the number of balloons. Detect can miss a dimension drawn in an unusual way, and it can propose a number that is not a dimension, such as a part number. Reading the review list for a minute is faster than finding a missed characteristic after the report is issued.

Mistakes people make

  • Assuming a PDF has text because it looks sharp. Sharp vector linework can still have outlined text.
  • Confirming the whole list without reading it.
  • Forgetting the general tolerance for dimensions with none printed.
  • Using the CAD file's balloons, which number parts, as inspection balloons.
Which CAD systems work?
Any that exports a PDF with a text layer. We have tested the tool on the bundled sample, not on each CAD system.
How do I balloon a SolidWorks drawing for inspection?
Export the drawing sheet as a PDF that keeps its text, open it in the tool, press Detect and confirm the dimensions. SolidWorks and similar systems number parts for a bill of materials; inspection balloons are a separate copy.
Can I balloon a Fusion 360 drawing?
Yes, if you export it as a PDF with text. The tool works from the PDF, not the CAD file, so it does not matter which system produced it as long as the dimension text is selectable.
Why does Detect find nothing on my PDF?
The PDF probably has no text layer: it is an image, a scan or has outlined fonts. Try selecting a dimension in a viewer. If nothing highlights, balloon by clicking each dimension.
Will the tool change my CAD drawing?
No. It works on the exported PDF in your browser, and the ballooned export is a separate copy. Your CAD file and the original PDF are untouched.

Open a drawing — free

Related

Do not scale drawingThird-angle projectionSheet 1 of 1balloonmydrawing.com
Built and supported by Paul: [email protected]. AS9102 is a standard of SAE International; this site is not affiliated with or endorsed by SAE. Nothing here reproduces the standard. Explanations are our own and are not legal or compliance advice.Privacy · Terms · Refunds